Our project is designed with two jib arms that can rotate 360 degrees on a single pole. In this way, it was acquired from the field and provided that two different operators could operate independently.
A total of 19 cantilever cranes were manufactured and delivered within the scope of our project which was completed at the end of 2015 in Konya. The factory and field final tests of our cantilever cranes, which have a capacity of 2 tons and an arm length of 8 meters, have been completed successfully.
Our project, which will be a good reference to rotary car lifting machines, one of the most important equipment of the iron and steel industry, has been successfully tested and delivered to our customers.
Düzce Cam A.Ş., established on the production of Turkey's first special flat glassP. sand stock Hall preferred our company for full automatic winch system. We thank them and wish them error-free work.
Our project, which is one of the first examples of interlaced or bridged crane systems, has been delivered successfully.
Izmir-Istanbul highway bridge crossing the Gulf of Osman Gazi, the bridge used in the construction of 2x50 2+10 capacity, span and lifting height of 15 meters 46 square feet of our custom tandem oscillation mode and buckling prevention systems, including all the lattice type portal crane have been delivered seamlessly.
In our project prepared under the new investments of Konkap galvanizing company established in Konya province, we became a solution partner with standard ceiling winches, transfer cars, special semi-automatic winch systems for acid baths and single beam winch system for galvanizing line.
Bamesa steel Muradiye iron industry and Trade Company, which is one of the leading steel service center companies in the world, honored us by choosing our company.
As part of the new investment of Mass Makine, one of the leading suppliers of crushing elimination Sector, 7 double girder bridge roof winches were manufactured and delivered between 10 ton and 40 ton capacities.
In our Gesbey project, two lifting machines with 2x12.5 tons of main hooks and 3.2 tons of auxiliary hooks are working on the same bridge. our bridge span is 36 meters
Our project, consisting of 22 ceiling cranes between 3.2 Ton and 32 ton capacities, is designed with a lifting and execution speed above the standard speeds in line with the customer demand.
The prominent feature in our system, which is one of the 19-crane systems of Mita Poligon company located in Ankara, is the portal created on one side of the portal crane. It is designed to provide a 10 meter exit.
Within the scope of the project consisting of 21 crane systems in total, 2 portal cranes and 19 ceiling cranes were successfully delivered.
In our project completed in 2015 in Konya province, a total of 41 chain hoisting machines were designed and delivered as aluminum profile light crane system, 22 of which are compasses and 19 of them are manual monorails.
Copyright 2020 Güralp Vinç ve Makine Konstrüksiyon San. Ve Tic. A.Ş all rights reserved.